Does your wiTech MicroPod 2 support FIAT 500L (BF)
نوشته شده توسط : Likaibin

Does your wiTech MicroPod 2 support FIAT 500L (BF)

Answer: Yes, wiTech supports it.

Part 1: Two Routines that Must Be Run Upon Arrival

Part 2: Maintenance Light (Wrench Light) in EVIC

Part 3: Programming a Key

In detail…

Part 1: FIAT 500L (BF) – Two Routines that Must Be Run Upon Arrival

There are two routines that must be run for the 500L to be taken fully out of shipping mode

Routine 1:  Exit Shipping Mode

Select the BCM Module.
Select the Misc Functions tab.
Select the Exit Shipping Mode routine.
Follow the prompts on the screen to complete the procedure.
Routine 2: Configure Door Locks

The 500L ships with the door locks not configured to the vehicle, and also has a flashing door lock light on the dash under the radio.
This flashing lock LED is to let the technician know that the door locks have not been configured.
Run the Configure Door Locks routine to correct the situation and stop the blinking LED.
The Configure Door Locks routine requires a 5-digit key code unique to the vehicle VIN. The 5-digit key code can only be obtained from DealerCONNECT by authorized personnel (see Service Manager).
Select the Vehicle Preparations tab.
Select the Configure Door Locks routine.
Select the Continue button.
Follow the prompts on the screen to complete the procedure.
Critical Note: In rare cases, a 4-digit key code may be returned by DealerCONNECT for a 500L. Please contact STAR if this occurs.

Part 2: FIAT 500L (BF) – Maintenance Light (Wrench Light) in EVIC

How to Confirm Feature is Disabled:

Scroll through the EVIC menu and look for an option called Service.
If this option does not exist, this feature has already been disabled from the vehicle.
SUMMARY

The FIAT 500L is equipped with a service maintenance light (wrench light) in the EVIC.
This light is different from the oil maintenance light, and is used to notify customers they have reached a given mileage that calls for maintenance action.
If a vehicle has the wrench light illuminated (see image below), connect to the vehicle with wiTECH using 14.01 or later software, and the feature will automatically be disabled.
witech-Maintenance-Light.jpg

Part 3: FIAT 500L (BF) – Programming a Key

wiTech MicroPod 2 china clone is able to program a new to to US version FIAT 500L (BF)

Procedure:

Select the BCM module
Select the Misc. Functions tab
Select Program Keysand click the Start button
Ensure key is in the RUN position
Follow the prompts on the screen to complete the procedure.
Critical notes have been included below—please read!!

IMPORTANT NOTES:

You will be prompted to enter the 5-digit “electronic code” or “key code” obtained from DealerCONNECT. On the DealerCONNECT menu, click the Service tab, scroll down to theRepair Information box, and find the link with the name Key Code (see below). If the link is grey (not functional), you do not have access. Your Service Manager should have access.

wiTech-MicroPod-2-key-programming-2 (2)

All customer keys, including any previously programmed and replacement keys, must be learned during this procedure.
If any previously programmed keys are not reprogrammed during this procedure, they will be permanently disabled.
If a negative response 0x35 is received, please verify that 5-digit key code is correct for the vehicle by rechecking in DealerCONNECT.

wiTech-MicroPod-2-key-programming-1 (2)

WARNING! If the wrong key code is entered three times in a row it will lock out the BCM for 24 hours.
In rare cases a four-digit key code is returned by DealerCONNECT for a 500L. Please contact STAR if this occurs.

Summary:

Key programming on the FIAT 500L (BF) requires a 5-digit key code unique to the vehicle VIN.
The 5-digit key code can only be obtained from DealerCONNECT by authorized personnel.





:: بازدید از این مطلب : 171
|
امتیاز مطلب : 0
|
تعداد امتیازدهندگان : 0
|
مجموع امتیاز : 0
تاریخ انتشار : پنج شنبه 24 مهر 1399 | نظرات ()
مطالب مرتبط با این پست
لیست
می توانید دیدگاه خود را بنویسید


نام
آدرس ایمیل
وب سایت/بلاگ
:) :( ;) :D
;)) :X :? :P
:* =(( :O };-
:B /:) =DD :S
-) :-(( :-| :-))
نظر خصوصی

 کد را وارد نمایید:

آپلود عکس دلخواه: